Precision Model Kit Nippers with spring - Cut your build time in half
High quality Japan steel provide Straight smooth cuts without tearing. Dimensions: About 5 in x 3in x 0.8 in
Durable and lightweight construction for intensive model kit building sessions
Quick spring release to remove parts and Finish all your Bandai model kits in record time
Valtcan One Pull Pro sprue cutters for model kits, plastic/metal spures, pruning plants, wires and more. Cutting out pieces form trees usually takes up half the build time for a model kit builder. This time is increased if you do not have professional grade cutting tools that may tear, over-cut or under cut your model kit pieces. Such results lead to second and even triple touch ups with more cutting, sanding and repair. You need a model kit nipper to precisely cut trees with the least amount of sheer. The One Pull Pro Precision Model Kit Nippers will do the job the first time, every time.
Premium Sprue Cutter Nippers Designed for Your Bandai and Hobby model kits
Valtcan Nipper for Plastic Model Kits
Valtcan Sharp nippers are cutters for model kits, plastic/metal spures, wires and more. Cutting out pieces from model kit trees usually takes up half the build time for a model kit builder. This time is increased if you do not have professional grade cutting tools that may tear, over-cut or under cut your model kit pieces. Such results lead to second and even triple touch ups with more cutting, sanding and repair. You need a model kit nipper to precisely cut trees with the least amount of sheer. The Valtcan One Pull Pro Model Kit Nippers will do the job the first time, every time.
Designed for the beginner to advanced model kit builders
Steps to cutting out parts from Sprue tree kit:
Step 1: Cut piece out from sprue tree with about 0.5-1mm in spacings
Step 2: Cut remaining plastic nubs flush to rest of the part.
Optional Step 3: Use a sand paper with polish grit grating to remove rest of visible nub joint appearance that remains.
Flush Cutting nippers pliers provide the best solution to cut and trim plastic parts from their sprue trees.
Suitable for other projects as well including: bandai real grade, hg, pg, mg, metal kit, car and airplane kits, bonsai, trimming plants, wire cutting, and more!
Make sure to wipe blades every 15-20 parts that are cut to clear away any debris. This will set your pliers operating at optimum efficiency and effectiveness.
Snippers Comes with Protective Covers for Blade tips and Storage Pouch
Prolong your Vatcan pliers with the included blade protector and storage pouch.
Real Examples: Designed for Bandai under gates, nub removal, large and small parts.
Real Perfect Grade Sample
PG RX78 completed with Valtcan One Pull
Master Grade, Real Grade and High grade sample
RG, MG and HG model kits completed with Valtcan One Pull
Durable and Sharp
Over 4 Perfect grade model kits with one Valtcan One Pull Nipper and still going strong.
These nippers are fantastic. They have really made removing parts from runners a breeze. In most cases, I don't even need to follow up with a razor to remove any excess!
Shipping was very fast. Clippers were of very high quality.
Great nipper. Doing analysis of various nippers - 14 total. Very satisfied with quality and performance of the nipper.
These nippers made me realize how important good quality nippers are. I just started gunpla and was using a beginner pair that was cutting terribly. I saw one review of these so figured I'd try them out. Now my cuts are super clean with minimal nubs left behind and little sanding. An added bonus is they come with a nice case plus a cover for the blades. I can't recommend these enough!
I use these for cutting plastic canvas for stitchwork and they're great! They go through the canvas like a hot knife through butter, with no distortion or twisting of the canvas, no hand fatigue, and a lot less cleaning up of errant nubs. I can't believe the stitchwork shops don't carry them, they would sell like hot cakes.
Awesome for model kits.
Great product makes clean up so much easier
Gary L. Skeeters
Very good quality. Very happy.
Dennis P Carmichael
Excellent tool for cutting small parts from sprue tree. No worry about having small parts fly off the work surface as when you use a knife to cut them off. Very sharp and easy to use. I will recommend these to any serious modeler.
I use these for gunpla and they are great. The best nippers Ive used. The pouch they come with is good quality and helps with keeping track and preserving the nippers.
Great quality on the steel as well on the grip.
Great Product and work perfectly. Thanks so much!
Work great. good quality.
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device