Sturdy and lightweight, great to fit in a hiking bag. Perfect for storing my trail mix.
Titanium Canister Store It, Stack It, Heat It · 250ml · Press-Fit Lid · 58g Ultralight
Titanium Canister Store It, Stack It, Heat It · 250ml · Press-Fit Lid · 58g Ultralight
Titanium Canister Store It, Stack It, Heat It · 250ml · Press-Fit Lid · 58g Ultralight
Regular price
$18.00 USD
Regular price
Sale price
$18.00 USD
Unit price
per
Shipping calculated at checkout.
Couldn't load pickup availability
Buy It Once
Every Tin Rusts. Every Plastic Lid Cracks. This Does Neither.
You have thrown out the rusted tin, the coffee can with the split plastic lid, the jar that still smells like whatever lived in it last. That cycle has been quietly charging you for years. This is one piece of bare titanium with a press-fit titanium lid. No coating to flake, no liner to peel, no gasket to perish, nothing that rusts. It holds your beans, your tea, your salt, your hooks and matches, and it does the job until your kid inherits it.
The Material Argument
Bare Metal. No Wear Parts.
Uncoated, commercially pure titanium, inside and out. Nothing applied to the surface, so nothing wears off it. It cannot rust, it holds no odor, and it weighs less than a deck of cards. Weigh it, measure it, scratch it with steel wool if you want.
Weight
58 g
2 oz. Verifiable on any scale.
Capacity
250 ml
8.4 oz. About one small coffee cup of volume.
Footprint
65 x 91 mm
2.5 x 3.5 in. Sized for a pack pocket or a shelf row.
Coatings
0
No liner, no paint, no nonstick. Bare titanium is the finish.
Note: this is a single-wall dry-goods canister, not a thermos, and the press-fit lid seals against dust and spills, not submersion. It is the right trade: no gasket means there is nothing to perish, and no threads means nothing jams with grounds or cross-threads in the cold.
In the Shop, In the Truck
One Canister That Holds Up
Beans for the percolator. Tea, salt, tinder, fish hooks, the toothpicks that live in the truck console. It rides in a jacket pocket, takes a drop on concrete, and opens with one hand, work gloves on. The lid presses on and pulls off. No fuss, nothing to baby, nothing to replace.
Design Intent
One Material. Zero Failure Modes to Track.
A single metal, uncoated, so there is no interface to delaminate and no polymer to age. The lid is a friction fit machined to the body diameter, and it fits the base too, so it works as a stand or coaster while the canister is open. Bodies stack for storage. Titanium is biologically inert: your coffee tastes like coffee, your salt stays salt.
The Part No Jar Can Follow
When It Has To, It Goes In the Fire
No storage jar in your kitchen survives this page. Pull the lid, set the canister in the embers, and boil water in it. Plastic melts, coated tins burn their lining off, glass shatters. Bare titanium shrugs it off and wipes clean. It is a storage canister that moonlights as an emergency pot, which is exactly the kind of margin you want in a piece of camp gear.
Failure Analysis
Every Storage Container Fails Somewhere. Find the Failure Mode.
Each common canister fails at a known point. This one had those parts removed at the design stage.
| Component | What usually fails | This canister |
|---|---|---|
| Coated steel tin | Rusts at every scratch and seam | Bare titanium cannot rust |
| Plastic jar | Absorbs odors, stains, cracks in the cold | Nonporous metal, holds no smell, no stain |
| Rubber gasket lid | Perishes, sticks, gets lost | Metal-on-metal press fit, nothing to perish |
| Glass jar | Shatters in a pack or on a shop floor | 58 g of metal that takes the drop |
| Threaded aluminum canister | Threads jam with grounds and grit | No threads. Press on, pull off, gloves on |
Specifications
The Numbers
| Material | Commercially pure titanium, uncoated inside and out |
| Capacity | 250 ml / 8.4 oz |
| Weight | 58 g / 2 oz |
| Dimensions | 3.5 in tall x 2.5 in diameter (91 x 65 mm), lid on |
| Lid | Press-fit titanium slip lid, no threads, no gasket. Also fits the base as a stand or coaster |
| Stacking | Flat reinforced bottom, canisters stack for storage |
| Heat | Safe over open flame with the lid removed. Single wall, exterior gets hot fast |
| Care | Hand wash or wipe out. Steel wool is fine. No seasoning, no maintenance |
| Included | 1 canister body, 1 press-fit lid |
How It Works
Boiling Water in It, in 3 Steps
1
Uncap
Take the lid fully off before any heat. Never heat it sealed.
2
Set
Stand it level on stones or embers at the edge of the fire.
3
Lift
Use a gloved hand or pliers. Single-wall titanium is hot to the touch. Let it cool, wipe it out, refill it.
Before you order: this is a compact canister, 3.5 inches tall and 2.5 inches across, about the size of a small cup, not a pantry jar. The lid is press-fit, not threaded and not watertight: perfect for beans, tea, salt, spices, toothpicks, hooks, matches and pills, wrong for carrying liquids in a bag. If you heat it, remove the lid first and handle it with gloves.
FAQ
Questions, Answered Straight
Is the lid watertight?
No. It is a press-fit slip lid that seals against dust, spills and pocket lint. It keeps dry goods dry and fresh, and it pulls off with one hand. Do not carry soup in your pack. That detail is the design: no gasket to perish, no threads to jam.
How big is it, really?
3.5 inches tall, 2.5 inches in diameter, 250 ml of volume. Think one small coffee cup. It holds a good run of beans for the percolator, a month of loose tea, or all of the small hardware that currently rattles loose in your kit.
Can I actually heat it on a fire?
Yes. Take the lid off, set it level in the embers, and it will boil water. It is single wall, so it heats fast and the outside gets just as hot: lift it with a glove or tool. This is an emergency-pot capability, not a cook set replacement.
Will it rust or corrode?
No. Titanium forms its own passive oxide layer the instant it meets air. There is no coating to scratch through and no base metal underneath to bleed rust. Salt, coffee oils and damp jacket pockets do not touch it.
Will it hold the smell of coffee or spices?
No. The surface is nonporous bare metal. Rinse it and it is neutral again, so you can move it from ground coffee to loose tea to salt without a handover ritual.
Why a press-fit lid instead of threads?
Fewer failure points and faster access. Threads cross-thread, seize, and pack with grounds and grit. A machined friction fit opens with one hand, wearing gloves, in the cold. The same lid also presses onto the base, so it doubles as a stand or a coaster while the canister is open.
Can it dent?
It can, under a serious impact. That is the honest trade of a 58 gram wall. What it will not do is crack, shatter, rust, or lose a liner. A dent is cosmetic, and the canister keeps working with it.
How do I verify what I am buying?
Put it on a scale: 58 grams. Measure it: 65 by 91 millimeters. Hold a magnet to it: nothing. Scrub it with steel wool: the finish is the metal itself, so there is nothing to ruin. Every claim on this page is checkable at your bench.
